
Some might think glow-in-the-dark paint is an excellent idea for a bedroom wall. You can have all the fun of a blacklight party without having to leave your room!
However, it will not be accessible if you ever want to get the paint off the walls. In this blog post, we’re going to share some tips on how to get that paint off without ruining your walls.
Let’s get started with a small definition!
Table of Contents
What is Glow in the Dark Paint, and how does it work
Glow in the dark paint is made with phosphors, particles that emit light when exposed to energy. When the paint is first applied to a surface, the phosphors are excited and glow brightly.
However, over time, the excited state of the phosphors decreases, and the paint stops glowing. To make the paint glow again, you need to expose it to energy, such as light from a blacklight or flashlight.
The phosphors absorb the energy and become excited again, causing them to glow.
How to get Glow in the Dark Paint Off Walls –
There are a few different ways that you can remove glow in the dark paint from your walls. The best method to use will depend on how much paint you have on the wall and what type of paint it is.
1. For a small amount of paint –

If you have a small amount of paint on the wall, you can try to remove it with a damp cloth. This will work best if the paint is water-based. If the paint is oil-based, you can try using a mild solvent, such as mineral spirits.
Mild solvents are chemicals that can dissolve other chemicals. The most common mild solvents are mineral spirits and paint thinners. You can find these at most hardware stores.
Soak a cloth in the solvent and then rub it on the paint to use a mild solvent. The paint should start to dissolve and come off the wall.
2. For large Volumes of paint –
For larger areas of glow paint, you may need to use a chemical stripper. Read the instructions carefully and test the stripper on a small wall area before using it on the entire surface.
A chemical stripper is a type of solvent used to remove paint or other coatings from a surface. It works by dissolving the bonds between the coating molecules and the substrate.
There are two main types of chemical strippers: caustic and solvent. Caustic strippers contain alkali chemicals, such as sodium hydroxide (lye), that react with the paint to break it down.
Solvent strippers, on the other hand, use chemicals like methylene chloride to dissolve the paint. To use a chemical stripper, apply it to the surface with a brush or sprayer and let it sit for the time specified in the instructions.
After the time has elapsed, use a putty knife or scraper to remove the paint. You may need to repeat this process several times to remove all of the paint.
Once you have removed the paint, wash the area with soap and water to remove any residue.
3. Sand the Paint Off –

If you still have trouble removing the paint, you can try sanding the paint off the wall. This will work best if the paint is latex-based. You will need to use fine-grit sandpaper so that you don’t damage the wall.
The most common types of sandpaper are:
A) Aluminum oxide: This is the most common type of sandpaper. It is made with a synthetic abrasive that is hard and durable.
B) Silicon carbide: This type of sandpaper is made with a natural abrasive that is sharper than aluminum oxide. It is suitable for sanding hard materials, such as metals and glass.
C) Zirconia alumina: This type of sandpaper is made with a synthetic abrasive between aluminum oxide and silicon carbide in terms of hardness. It is suitable for sanding both soft and hard materials.
Zirconia alumina is the best type of sandpaper to remove glow in the dark paint. It is harder than aluminum oxide but not as hard as silicon carbide. This makes it ideal for sanding both soft (paint) and hard (wall) surfaces.
How to sand the paint off –
Start by attaching the sandpaper to a sanding block to sand the paint off the wall. This will help to prevent you from damaging the wall. Start sanding in a small area and work your way out. Be sure to sand with the grain of the wood.
Once you have removed all of the paint, vacuum the area to remove any dust. You can then wash the area with soap and water.
Once you have removed all of the paint, you will need to repaint the wall. Be sure to use a primer before painting so that the new paint will adhere properly.
Tips for preventing Glow in the Dark Paint from staining your walls –
If you plan on using glow in the dark paint, you can do a few things to avoid it from staining your walls.

1. Use a primer before painting. This will help create a barrier between the paint and the wall so that the paint is less likely to soak in.
2. Use paint that is specifically made for use on walls. These paints are less likely to stain than other types of glow in the dark paint.
3. Apply several thin coats of paint instead of one thick coat. This will help to prevent the paint from soaking into the wall and staining it.
4. Allow the paint to dry completely before exposing it to light. This will help prevent the paint from becoming too excited and causing it to stain the wall.
5. Clean up any paint that gets on the wall immediately. The longer the paint is allowed to sit, the more likely it is to stain.
How to Avoid Glow in the dark Paint from Spilling on Walls –
If you are using glow in the dark paint, you must be careful to avoid spilling it on your walls and other areas. Here are a few tips to help you avoid accidents:
1. Be careful when moving cans or bottles of glow in the dark paint. You don’t want to knock them over and cause a spill accidentally.
2. Use a small brush or roller to apply the paint. This will help to prevent you from accidentally spilling the paint.
3. Wipe up any paint that gets on surfaces immediately. The longer the paint sits, the harder it will be to remove.
4. Wear clothes that you don’t mind getting paint on. This will help prevent the paint from getting on your clothes and causing a mess.
5. Use a drop cloth or newspaper to protect the floor from paint. This will help to keep your floors clean and free of paint stains.
If you follow these tips, you should be able to use glow in the dark paint without spillage or staining. However, accidents can still happen. If you do spill paint on your wall, you must remove it immediately.
FAQs –
How do I remove glow in the dark paint from my walls?
There are a couple of ways to get glow in the dark paint off of your walls. The best way to do it will depend on the type of paint you have and the type of wall it is on.
I’ve listed three methods to remove the above; just give them a glimpse.
Can I use a hairdryer to remove glow in the dark paint from my walls?
No, you should not use a hairdryer to remove glow in the dark paint from your walls. The heat from the hairdryer can actually make the paint harder to remove. It’s best to stick with the methods listed above.
Can I use a chemical stripper to remove glow in the dark paint from my walls?
You can, but you must be careful when using chemical strippers. Make sure you read the directions carefully and use the stripper in a well-ventilated area.
You should also wear gloves and protective eyewear to avoid getting the stripper on your skin or your eyes.
Will sanding the paint off my walls damage the wall?
It’s possible that sanding the paint off your walls could damage the wall, depending on the type of wall it is. If you’re unsure, it’s always best to test a small area first. If the wall is damaged, you may need to repaint or repair it before you can use it again.
Can I use a power washer to remove paint from my walls?
No, you should not use a power washer to remove paint from your walls. The high pressure from the power washer can actually damage the wall. It’s best to stick with the methods listed above.
Conclusion –
Glow in the dark paint is a fun way to add some excitement to your walls. However, it is essential to be careful when using this type of paint so that you don’t end up with stains on your walls.
Be sure to use a primer before painting, use paint that is specifically made for walls, and apply several thin coats of paint instead of one thick coat.
Also, be sure to clean up any paint that gets on the wall right away. If you follow these tips, you can avoid staining your walls with glow in the dark paint. Thanks for reading!
Leave a Reply